RG-2400® NP Anti-Corrosion Gel

RG-2400 NP is used on new piping systems, valves, tanks and vessels with a temperature range up to 225º F.

RG-2400 NP is an anti-corrosion gel utilizing Polyguard’s unique mineralization technology, (the "science of Minetics"); this gel replaces the corrosion process with a mineral formation on and into the metal surface creating a mineral barrier 50-200 angstroms thick. As time passes, the mineral layer on top of the substrate increases slightly in thickness. A pH in the alkaline range passivates water vapor, and the hydrophobic nature of the gel repels water.

2400 NP is not "new" technology; it is a formulation designed for the insulation industry, under insulation for NEW piping systems, tanks and vessels. It is a non-drying compound easily brush/spray applied to pipes, fittings, valves, tanks and vessels. Its’ non-skinning and non-sag properties make it a permanent solution.

RG-2400 NP prevents corrosion from occurring on new piping systems; it requires no preparation other than making sure there are no oils, dirt or rust on the piping. In addition, RG-2400 LT prevents stainless steel and copper stress crack corrosion under insulation.

The insulation contractor applies RG-2400 NP on the new pipe using PVC chemical gloves, then for even coverage remove the excess with the Patented AccuTrowel™ tool. The opacity and color of the product (purple) allows for easy site inspection of an installation. When you cannot see the pipe through the purple gel, you should have sufficient coverage. It is assumed that any new piping will not be at any temperature above or below ambient.

RG-2400 NP is also "NON-TOXIC", and will NOT harm the environment. RG-2400 Cleaner is also available from Polyguard; this cleaner is specifically formulated to clean tools, equipment, and hands without harmful chemicals.

Companion Products:

  • RG-2400 Cleaner for easy clean up with ReactiveGel products
  • AccuTrowel™ for determining accurate application thickness and avoiding waste

RG-2400 LT Application Video

Features & Benefits

  • For NEW piping systems, valves, tanks & vessels
  • For use on any system up to 250ºF, (110ºC)
  • No preparation on new pipe without oils, dirt, or rust
  • Easily brush/spray applied
  • Non-Drying Compound
  • Non-skinning, non-sag properties
  • Prevents corrosion from occurring, stops existing corrosion from advancing
  • Non-Toxic, environmentally benign
  • Requires minimal preparation

RG-2400 NP anti-corrosion gel

RG-2400 NP anti-corrosion gel

RG-2400 NP anti-corrosion gel