Polyguard Mechanical Products: Corrosion Control Coatings and Compounds

	MECHANICAL PRODUCTS DIVISION
Mechanical Home \| RG-2400 Home \| News \| Data Sheets \| MSDS's \| Shows \| Technical Updates \| Qualified Fabricators \| Photos \| Rep List \| Contact Us

Our NEWEST product! For the first time - the answer to the problem of corrosion under insulation
	Pipe with RG-2400	Pipe with-out RG-2400

Polyguard's Mechanical Products Division specializes in "peel 'n stick" rubberized bitumen membranes. Our product line consists of "self healing" vapor barrier membranes, weather barrier membranes, and UV resistant membranes to jacket insulation systems above and below ground, and corrosion control coatings and compounds.

NOW AVAILABLE!!!
Insulrap® with a SMOOTH SURFACE

Insulrap® 30 - It's back! I-30 WITH-OUT SCRIM, a smooth surface!

Insulrap® 50 - It's back! I-50 WITH-OUT SCRIM, a smooth white surface!

Insulrap® 'NO TORCH 125' - It's now made WITH-OUT SCRIM, a smooth surface!

Insulrap® WITH-OUT SCRIM

Brief product descriptions of each membrane is supplied below:

Fabwrap 20™
A 20 mil thick ZERO PERM "peel 'n stick" jacket for interior refrigeration piping systems, cold ductwork, chilled water systems, and cold vessels. Available Now!

Insulrap 30-SJ™
A vapor barrier membrane for UNDER MECHANICAL JACKETING

Insulrap 50™
A vapor barrier membrane for "clean" direct burial applications

Alumaguard 60™
A vapor/weather/UV barrier membrane for exterior applications

Insulrap 75™
A vapor barrier membrane for rocky soil direct burial applications

Insulrap "NO TORCH" 125™
A vapor barrier membrane for elevated temperature burial applications

Solvent Based Cold Weather Activator™
A roll on activator to soften compound for cold weather installation

Water Based Cold Weather Activator™
A roll on adhesive to improve adhesion in cold weather

CA-9™ and CA-14™ Corrosion Control Coatings
A brush applied corrosion coating

Mineralization technology for pipes! PREVENTS corrosion, STOPS existing corrosion!

Wet-Set™ Corrosion Control Coating
A two-part brush applied coating that allows application to wet pipes without shutting down the refrigeration system, or drying off pipes!

Insulshield™
A puncture resistant "insurance" jacket over I-50 in direct burial in ROCKY conditions.

Click the Insulation Outlook logo below to get a FREE SUBSCRIPTION
to Insulation Outlook Magazine; the publication of the insulation industry.

*Polyguard Proudly* supports these professional organizations:**

ASHRAE	IIAR	MICA	NACE	NIA	SMACNA	SWICA	TIAC	WIA

Home / Architectural / Highway / Pipeline / Mechanical / Residential /
Underseal / ISO 9001 / MSDS's / Data Sheets /
History / Site Map / Contact Us

As of 9/1/2003, Polyguard Products' quality system has been certified to American, Dutch, and German quality systems requirements:
- American Natl. Standards Institute
- Dutch Council for Certification
- Deutscher Akkreditierungs Rat