Underseal Split Slab Photo Album

	UNDERSEAL™ Split Slab Photo Album
HOME \| ARCHITECTURAL HOME \| UNDERSEAL \| PRODUCTS \| DATA SHEETS \| MSDS's \| SPECS \| DETAILS \| SHOWS & EVENTS \| GREEN/LEED \| WARRANTY \| CONTACT US

UNDERSEAL™ Split Slab Waterproofing Membrane (previously 851)
	Installed between two slabs, UNDERSEAL™ Split Slab Waterproofing Membrane adheres directly to the base slab. The bottom layer is a 55 mil polymerized asphalt sealant, which acts as a seal and an elastomeric stress absorbing formulation. This is the primary material which guarantees a permanent seal when the concrete cracks or the joint moves above the membrane. The top layer is a 20 mil geomembrane, highly puncture resistant and stretchable. *UNDERSEAL™ Split Slab Waterproofing Membrane* does not require a protection board if light construction traffic is present. Many times it is used in conjunction with Polyguard horizontal drainage boards. Flow 18H & Flow 10HV* drainage boards.*			Click image to view full size
Click image to view full size	Data Sheet PDF:83KB-2pg's.	MSDS	Guide Specs	Details

UNDERSEAL™ Split Slab Photos (Click on images to view full size)

Application shot 1	Application shot 2	Application shot 3	Application shot 4


Application shot 5	Application shot 6	Application shot 7	Application shot 8


Application shot 9	Application shot 10	Application shot 11	Detail shot 1


Detail shot 2	LM-95 Detailing shot 1	LM-95 Detailing shot 2	LM-95 Fillet


Split Slab Balcony Detailing	Split Slab Balcony Application


	Home / Architectural / Highway / Pipeline / Mechanical / Residential / Underseal / ISO 9001 / MSDS's / Data Sheets / History / Site Map / Contact Us © 2006 Polyguard Products, Inc. All Rights Reserved.	As of 9/1/2003, Polyguard Products' quality system has been certified to American, Dutch, and German quality systems requirements: - American Natl. Standards Institute - Dutch Council for Certification - Deutscher Akkreditierungs Rat